kompleks1

Handling complex

  Область применения Тех. характеристики Модуля площадки MLC CP Тех. характеристики Модуля заезда Доставка до клиента Перегрузочные комплексы MLC CPX      Перегрузочные комплексы поставляются в случаях, когда на территории необходимо организовать полноценную погрузочно-разгрузочную зону под ту или иную технику. Как правило, комплексы состоят из горизонтальной площадки и наклонной части. Горизонтальную площадку необходимого размера легко составить из уже разработанных модулей площадки, а для въезда на нее есть специальный модуль заезда. Однако, порой, ввиду специфики территории, нашими инженерами разрабатываются индивидуальные комплексы с угловыми столами, проемами под столбы и т.п. Поэтому для подбора оптимального…

rampa dlya zhd vagonov salamandra №4

New ramp for rack cars

По контракту изготовлена и поставлена рампа для выгрузки автомобилей из железнодорожных двухъярусных вагонов. В конструкции рампы продуман сложный механизм подъема – опускания на нужный ярус вагона, просчитаны углы для съезда машин и введено множество элементов для безопасности груза и работающего на рампе персонала. Регион поставки: Свердловская область.

est-smart

Hydraulic ramp MLC «Hydra»

CurrentSlide 1Slide 2Slide 3 Application Area Technical parameters Delivery to a Customer Hydraulic loading ramp MLC «Hydra»      Construction of this ramp consists of the horizontal part with in-line lip and incline part with flexible lip. The upper ramp is placed directly in the body of the car, and the lower trapezoid-shaped one helps to control the turning angle, making it smoother. If the height of a standard container lorry is 1.2 m, the turning angle is 8°, and the corresponding slope is 14%. In the front part there are solid wheels of standard size 5.00х8 and a hydraulic system. Hydraulic system could be manual or electrical (220V or 380V). Hydraulic system could be adjusted on any ramp of MP and HL series. The hydraulic loading ramp "Hydra" is easily moved by the forklift with load capacity of 1.5 tons.  Hydraulic ramp based on “Standart” ramp of MP series Working load capacity 7 tons Maximum load capacity 9 tons Length 11,5 meters Width 2 m Width of the ramp carriageway 1.92 meters Access ramps (lips): in-line upper one 2x0,5m flexible lower one 1,7x0,5m Adjustment range 0,9 – 1,5 m The adjusting device hydraulic system Transport wheels solid, dimensions 5.00х8 Safety rail (bump stops) 200mm, removable The material of the frame I-beam 30B1 The material of the carriageway EMS (expanded metal sheet) 510 The material of the lips treadplates + channel The construction quality is confirmed by ISO certificates and 36 months of warranty!      All MLC “Hydra” range ramps have the properly sized overall length and width. Shipment is possible in the vehicle of the customer or by a hired transport company. Our managers arrange delivery of any ramp directly to your site through proven logistics companies and at a profitable price. Delivery is carried out to all regions of Russia, CIS and Europe countries. If you are ready to provide your own transport for shipment, then the loading is done by our company and is absolutely free! Production time Average production time of the dock ramps with hydraulic system is only 20 days! Documentation Provided: Technical data sheet GOST Certificate (certified copy) Instruction manual Nameplate with identifying markings and a serial number Certificate ISO 9001:2011, ISO 14001:2004, OHSAS 18001:2007 (certified copies) Distinctive features - safe removable protection fencing of 20cm - high quality components - movable lower ramp (lip) for a smooth angle for forklift - easy-to-handle hydraulic gearing - solid wheels in base set - wheel chocks in base set (4 pcs.) - chains for linking to a truck - construction checked in usage by hundreds of professionals RESULT: a ramp purchased, in addition to its practical functions, significantly reduces the labor force required for handling operations and, as a consequence, the budget. Related itams Following items are often purchased as a set with loading ramp: ♦ Fork extensions on a forklift ♦ Ram for roll goods Get technical offer Get an advice Get an invoice

перегрузочный мостик для контейнеров

Container ramp

CurrentSlide 1Slide 2Slide 3 Application Area Technical Parameters Delivery to the Customer Handling BridgeMLC УМ      Handling bridges are widely used because of their ability to compensate for small height differences. The most common task is the need to get from the ground (zero height) the interior of the container, which forms a step of 15cm on average. In such cases, the problem can be easily solved by installing a bridge. Container bridges come in various configurations and differ by the type of equipment which will work with them (trucks or forklifts). Levelling bridges are moved quite easily by forklifts. Bridge Dimensions 1,7х2m 2,2х2m Load Capacity 3t 7t 3t 7t Equipment trucks forklifts trucks forklifts Covering corrugated «lentil» It is possible to design and manufacture Levelling bridges for individual sizes and other parameters. The construction quality is confirmed by GOST-R certificate!      Transportation of MLC УМ handling bridges can be carried out by any transport company of your choice. We will personally organize and order for delivery for you. For this purpose you just need to tell us: suggestions for the choice of the transport company (TC) "door to door" delivery or to the TC terminal in your city contact details of the employee receiving the products      Delivery is carried out in all regions of Russia and CIS countries (see the geography of deliveries through the link: Link). If you are ready to provide your own transport for shipment, then the shipment is done by our company and is absolutely free! Production Time Term of manufacturing the standard size handling bridge is 5 working days on average! Documentation Provided: Technical data sheet GOST certificate (certified copy) Optional: Certificate ISO 9001:2011, ISO 14001:2004, OHSAS 18001:2007 (certified copies) Distinctive Features - strong bridge basis made of channel bars - movable ramps to avoid a step formation at passing - optional: additional carriageway covering with a sheet of EMS - provided inlet holes for the forks of the forklift - easy to transport - selecting configurations depending on the specific tasks and equipment RESULT: Levelling bridges, in addition to their practical functions, significantly reduce the effort required for handling operations and, as a consequence, the budget. Related Products ♦ Fork extenders ♦ Ram for roll goods Get technical offer Get an advice Get an invoice

kompleks1

Handling complex

CurrentSlide 1Slide 2Slide 3 Application Area Technical Parameters Parameters of MLC МР-А Passing Module, 7m Delivery to the Customer Handling BridgeMLC CPX      Handing complexes are supplied when it is necessary to organize a proper cargo handling area for particular equipment on site. Typically, systems consist of a horizontal platform and an inclined part. A horizontal platform of the required size is easy to compose out of already developed platform modules, and there is a special passing module to enter onto it. However, sometimes, due to the specificity of the area, our engineers develop custom-made complexes with corner tables, openings for pillars, etc. Therefore, for selection of the optimal integrated solution we collect all the possible information, and if necessary, we are ready to come for checkup and measurements on site.      Thus, we can offer you both a ready solution and an individual project. Parameters of MLC CP Platform Module Module Dimensions 3х2m 3х2,4m Load Capacity 3t 7t 3t 7t Equipment trucks forklifts trucks forklifts Covering corrugated "lentil" expanded metal (EMS) corrugated "lentil" expanded metal (EMS) Type of Supports Parameters of MLC CP Platform Module telescopic (height range of 1-1.6m) Regular folding ramps 1,7х0,5m 1,7х0,5m 2х0,5m 2х0,5m Protective Fencing Height 200mm, removable type It is possible to design and manufacture handling complexes and their components according to individual sizes and other parameters. The construction quality is confirmed by GOST-R certificate! Working load capacity 7 tons  Overall length  7 meters  Width  2 m  Width of the ramp carriageway  1,92 m  Folding ramps: movable upper  1,7х0,5м  Folding ramps: movable lower  1,7х0,5m  Height adjustment range is  1,0 – 1,5 m  Adjusting device  is a mechanical JOST jacking system (made in Germany)  Pneumatic transport  wheels (standard), standard size 5.00х8  Protective Fencing (bump stops)  200mm height, removable Material of the frame flange beam Material of the carriageway BES (expanded metal sheet) 510 Material of the folding ramps corrugated "lentil" sheet + channel bar (GOST) It is possible to design and manufacture handling complexes and their components according to individual sizes and other parameters. The construction quality is confirmed by GOST-R certificate!      MLC CPX handling complexes are designed specifically so that they would match the standards of standard-sized cargo. Shipment is possible in the customer’s vehicle or by a hired transport company. Our managers arrange delivery of any module directly to your site through proven logistics company and at a good price. Delivery is carried out in all regions of Russia and CIS countries (see the geography of deliveries following the link:Link). If you are ready to provide your own transport for shipment, then the shipment is done by our company and is absolutely free! Production Time Term of production for a handling complex depends on its size and complexity and is calculated individually for each project. Documentation Provided: Technical data sheet GOST certificate (certified copy) Optional: Certificate ISO 9001:2011, ISO 14001:2004, OHSAS 18001:2007 (certified copies) Distinctive Features - inclined passing part: all the advantages of MLC МР rack series - handling platform: all the benefits of the platform modules (tables) - individual project design - ability to create a loading zone “from scratch” - taking into account territorial specificity - a variety of configurations - mobility: ability to move on site and transport to another object RESULT: properly designed handling complexes, in addition to their practical functions, significantly reduce the effort required for handling operations and, as a consequence, the budget. Related Products ♦ Fork extenders ♦ Ram for roll goods ♦ Beam crane for forklift Get technical offer Get an advice Get an invoice

modul-zaezda1

Incline module

CurrentSlide 1Slide 2Slide 3 Application Area Technical Parameters Delivery to the Customer Module of inclined passing element MLC МР series, load capacity 7 tons, model МР-А 7m      Structurally, it is a sloping element with upper and lower movable ramps. The upper ramp is placed directly onto the platform module, and the lower one helps to control the turning angle, making it smoother. If the height of a standard container lorry is 1.2 m, the turning angle is 12°. In fact, the passing module can be regarded as a distinct shortened rack, so it has all the advantages of our standard racks. In the front part there are wheels of standard size 5.00х8 and a jacking system designed on the basis of known JOST jacks of German production. The safety fence is removable for working conveniently.      The inclined module is easily moved on-site by a single forklift with load capacity of 1.5 tons, besides it does not occupy much space during storage due to its total length of 7 meters. Working Load Capacity 7 tons Overall length 7 meters Width 2 m Width of the ramp carriageway 1,92 meters Folding ramps: movable upper 1,7х0,5m Folding ramps: movable lower 1,7х0,5m Height adjustment range is 1,0 – 1,5 meters  Adjusting device is a mechanical JOST jacking system (made in Germany) Transport pneumatic wheels (standard), standard size 5.00х8 Safety fencing (bump stops) 200mm height, removable Material of the frame flange beam Material of the carriageway EMS (expanded metal sheet) 510 Material of the folding ramps corrugated "lentil" sheet + channel bar (GOST) The construction quality is confirmed by GOST-R certificate and 36 months of warranty!      The passing module has overall length and width. Shipment is possible in the customer’s vehicle or by a hired transport company. Our managers arrange delivery of any module directly to your site through proven logistics company and at a good price. Delivery is carried out in all regions of Russia and CIS countries (see the geography of deliveries following the link: Link). If you are ready to provide your own transport for shipment, then the shipment is done by our company and is absolutely free! Production Time Module of sloping element with a length of 7m is IN STOCK in our warehouse! Documentation Provided: Technical data sheet GOST certificate (certified copy) Instruction manual Nameplate with identifying markings and a serial number Optional: Certificate ISO 9001:2011, ISO 14001:2004, OHSAS 18001:2007 (certified copies) Distinctive Features - safe removable protection fencing 20cm height - high quality components - movable lower ramp for a smooth passing angle - takes up little space on site - design proven by professionals RESULT: the passing module can be used both in combination with the platform module and as a separate rack. And all this is at a very reasonable price. Related Products ♦ Fork extenders ♦ Ram for roll goods Get technical offer Get an advice Get an invoice